ResoTherm Chip R - CNC routed UFH chipboard system

Resonate's ResoTherm Chip R are a range of CNC grooved chipboards suitable for underfloor heating applications. The high-performance boards are available in 1200mm and 2400mm lengths and can be bonded to with a layer of insulation or finished with a foil facing depending on your project requirements.

Cost Effective Underfloor Heating

ResoTherm Chip R boards provide extremely efficient and high performance underfloor heating for building occupants. They are ideal for all types of developments including residential, care homes and offices.

This system is ideal for replacing existing floor boarding on timber joisted floors as it has minimal impact on floor heights. The system is finished off with our 6mm ResoBacker (fibre cement) cover board, available plain or with pipe layout printed.

The P5 chipboard used to manufacture these panels is FSC certified (FSC-C221537).   

Structural Testing

ResoTherm Chip R has been tested in accordance with:

BS EN 1195:1998

BS EN 12871:2013

Ultimate Floor Load, F max = 6.62kN

*Safety factor of 50% should be applied to above value

Testing Parameters

Timber joists = 150mm x 47mm at 600mm centres

ResoTherm Chip R = 22mm thick; 16mm rout at 150mm centres

ResoBACKER = 6mm thick; glued and screw at 150mm centres