Watco Safety Coat - Anti Slip Concrete Paint
Heavy duty two part epoxy resin non slip floor coating
- Our strongest water based epoxy coating
- Pre-blended aggregate for an even finish
- Fast curing – apply two coats in one day
- Easy clean, finely textured
Description
Watco Safety Coat has been re-formulated to produce a ‘Best in Class’ water based, anti slip epoxy resin.
This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available with a ‘diamond hard’ wax and ceramic additive provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts.
All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC.
All tests have been undertaken to ISO standard where applicable and demonstrated this ‘Best Ever Formulation’ to be 40% harder wearing than previously.
Recommended areas of use
- Warehouse
- Production Areas
- Workshops
- Showrooms
- Potentially slippery, heavy wear areas
Features of Safety Coat
- Tough, hard wearing floor finish for heavy wear areas
- Pre-blended aggregate provides an evenly textured finish
- Apply to bare or previously painted surfaces
- Easy roller, low odour application
- Apply 2 coats in one day to reduce downtime
- New colour formulations to RAL shades
- Tested safe for use in food production areas
- Superior performance demonstrated by ISO testing to CE mark EN1504-2
Specification Details
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Watco UK is consulted before specifying.
Technical
|
||
| Components (?) | 1 x curing agent and 1 x resin | |
| Coverage (?) | 30 m2 | |
| Features (?) | Apply 2 coats in one day to reduce downtime , Apply to bare or previously painted surfaces , Easy clean , Easy roller , Fast curing , Our strongest water based epoxy coating , Pre-blended aggregate for an even finish , Pre-blended aggregate provides an evenly textured finish , Tested safe for use in food production areas , Tough | |
| Primer Required (?) | Use Watco Powerfloat Primer on very smooth surfaces | |
| UV Resistant (?) | ||
Size & Weight
|
||
| Film Thickness - Dry (?) | 100 μm | |
| Film Thickness - Wet (?) | 160 μm | |
| Pack Size (?) | 5 l | |
Commercial
|
||
| Application (?) | Concrete , Well bonded paint , Wood | |
| Typical Building Type (?) | Food Processing , Showrooms , Warehouses , Workshops | |
Physical Properties
|
||
| No. of Coats Required (?) | 2 | |
| Pot Life (?) | 120 mins | |
| Pot Life at 20°C (?) | 2 hrs at 20°C | |
| Shelf Life (?) | 12 Months | |
Materials & Finishes
|
||
| Colour (?) | Black , Blue , Green , Grey , Red , White , Yellow | |
| Composition (?) | 2 part reinforced water based epoxy resin | |
| VOC Content (?) | 30 g/l | |
Certifications & Ratings
|
||
| CE Marking (?) | ||
| Standards (?) | EN 1062-3 , EN 1504-2 , EN 1542 , ISO 1519 , ISO 16000 , ISO 4586-2 , ISO 5470-1 , ISO 6272 | |
Other
|
||
| Location Suitability (?) | Internal | |
| Uniclass (?) | Pr_35_31_85_04 Anti-slip floor coatings | |
Similar Anti-slip Floor Treatments Products
Contact
Contact
Contact