Watco Powerfloat Primer - Preparation

Allows smooth concrete to be painted without mechanical preparation

  • Unique formula prevents paint peeling off smooth concrete
  • Retain the smooth powerfloat finish
  • Can be overcoated with most paints including Watco Epoxy Gloss Coat
  • Avoids costly shot blasting

Description

Enables coatings to be applied to hard, smooth surfaces which would usually reject paint. Avoid using any coating which includes a strong solvent. For more information, please download a product datasheet from the quick links below.

Recommended areas of use

  • Priming power floated, very smooth or non porous concrete floors which are prone to rejecting paint
  • Clear Powerfloat Primer can be used on clear ceramic tiles before application of Watco Protecta-Coat

Features

  • Primes hard, smooth surfaces ready for painting
  • Eliminates the need for costly shot blasting or grinding
  • One coat application: quick and easy to apply
  • Low odor
  • Superior performance demonstated by ISO testing to CE Mark EN1504-2
  • Easily applied by roller




Specification Details

Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Watco UK is consulted before specifying.

Watco UK
195-205 High Street, Guildford
Surrey
United Kingdom
GU1 3AW
P: 01483418418

Watco Powerfloat Primer - Preparation

Standard
• Application Method / Fixing Method: Brush, Pile roller
• No. of Coats Required: 1
• Pot Life at 20°C: 2 hrs at 20°C
• Shelf Life: 24 Months
• CE Marking: Yes
• Standards: EN 1062-3, EN 1504-2, EN 1542, ISO 1519, ISO 16000, ISO 2409, ISO 5470-1
• Location Suitability: Internal
• Uniclass: Pr_35_31_85 Specialist coatings
• Colour: Grey, White
• Composition: 2 part - water based epoxy resin
• VOC Content: 10 g/l
• Film Thickness - Dry: 120 μm
• Film Thickness - Wet: 160 μm
• Pack Size: 5 l
• Application: Concrete
• Coverage: 30 m2

File Downloads

Clear selection