Vitosol 300-T

The Vitosol 300-T SP3B tube collector meets the highest criteria for efficiency and safety. Its exceptionally high solar yield makes it the most powerful collector in the Viessmann range.
Its anti-reflective Glass vacuum tubes and the use of very high quality materials result in optimum output values. The highly effective thermal insulation with melamine resin foam in the header casing also contributes to that.
The small amount of fluid inside the collector and the automatic temperature-dependent shutdown ensure particularly high operational reliability. The Vitosol 300-T SP3B is therefore also recommended for systems where heat transfer is reduced at certain times (in schools, for example).
To maximise heat transfer, the condensers are completely enclosed inside the Duotec twin pipe heat exchanger. It absorbs the heat particularly well and transfers it to the heat transfer medium flowing past.
In heat pipe systems, the solar medium does not flow directly through the tubes. Instead, a process medium evaporates inside the heat pipe below the absorber and transfers the heat to the heat transfer medium via the Duotec twin pipe heat exchanger.
ESOP Online provide you with a calculation program for solar thermal systems, which you can use to compare and contrast various product configurations and combinations and their cost effectiveness.
Once you have entered all the required parameters, ESOP calculates the standard values for the insolation energy and the resulting system yield, as well as the percentage of your total energy demand covered by the various different combination options.
Extremely high performance thanks to anti-reflective glass vacuum tubes
Vacuum tube collector based on the heat pipe principle, with temperature-dependent shutdown, for maximum operational reliability
Rotating tubes for higher performance
Constant high performance without risk of contamination
Straightforward and quick installation