AS10 Plus - Very High Performance
Supply and install an AS10TPlus axial fan with integral over-run timer (adjustable between 3 and 25 minutes) as supplied by Vectaire Ltd, Lincoln Road, Cressex Business Park, High Wycombe, Bucks, HP12 3RH. The fan is to be suitable for installation either into a ceiling, wall or panel (with the appropriate accessories), and have the capability of being ducted for up to 6m. There should be a neon on the front of the fan to indicate when it is operating. The fan casing should be made of shockproof, high quality technopolymer, contain a motor with sealed, self-lubricating bearings, and be protected with a thermal cut-out. The fan should be double insulated and be suitable for installation into Zones I and II. The fan is to be CE marked and comply with current EC Low Voltage Directive EMC89/336 and with BSEN60529. The fan should finally comply with Building Regulations requirements for installation into a toilet, bathroom or shower room.
Specification Details
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Vectaire is consulted before specifying.
Technical
|
||
| Air Volume (?) | 95 m3/h | |
| Frequency (?) | 50 Hz | |
| Power (?) | 14 W | |
| Sound Level (?) | 31 dB | |
| Voltage (?) | 240 V | |
Physical Properties
|
||
| Product Type (?) | 8 different models | |
Size & Weight
|
||
| Depth (?) | 17 mm | |
| Length (?) | 160 mm | |
| Width (?) | 160 mm | |
Certifications & Ratings
|
||
| CE Marking (?) | ||
Commercial
|
||
| Typical Use (?) | Bathrooms , Shower-rooms , Toilets | |
Other
|
||
| Uniclass (?) | Pr_60_65 Air and fume source products | |
Similar Extraction & Ventilation Products
Contact
Contact
Contact