Insulated Loft Hatch 550x700mm with Picture Frame – Meets Part L of the Building Regulations U-Value 0.034 W/m2K

** We can make any size Loft Hatch, email  with your structural opening (hole size) for a quote. ** (lead time on Loft Hatch is 5 working days)

This insulated loft hatch with picture frame meets Part L of the Building Regulations U-Value 0.034 W/m2K which when installed provides the Clear Opening size of 520 x 620mm which meets the latest NHBC Guidelines.

This lightweight Draught Sealed Loft Hatch incorporates a 40mm thick Danopren TR40 Insulation infill to the rear of the door to help the Hatch achieve the required U-Value of 0.034 W/m2K.

Not only does our new Loft Hatch provide the required Part L Building Regulations U-Value and provide the required NHBC clear opening size, but it is also extremely aesthetically pleasing due to the near, clear and modern finish. The Hatch arrives on site Powder Coated RAL 9010 30% Gloss as standard (other RAL colours are available upon request at an additional cost if required).

The dropdown action of the Loft Hatch is operated from below by way of FREE of charge Tee-Key which is included with every Loft Hatch order for ease of operation (extended 500mm Tee-Keys are available as an extra over option for even easier operation from floor level).

The Loft Hatch is manufactured here in the UK and arrives with you fully assembled and ready to install straight out of the box.

The new design makes this Loft Hatch even easier to install than others in our range due to the lightweight design of the door. You must ensure that the hole in the ceiling is 7mm larger than the panel size to ensure that it will fit. Then you merely need to screw through the pre-drilled holes in the sides of the Loft Hatch frame into the loft joists to secure the Hatch into position and lock the Hatch door with the tee-key provided! Yes, it really is that simple!

Structural opening size is 557x707mm and clear opening with door at 90 degree is 520x620mm.

CONSTRUCTION
The TAP12-000 -MD-PF-BL-BFI is manufactured from Zintec Steel with a 0.9mm thick Door and Frame. The panels door leaf is hinged by a Pin hinge system.. The panel is insulated with a 40mm thick Danopren TR40 Insulation infill. This Product achieves a U Value of 0.034 W/m2K.