Unleaded Everdry Stepped Cavity Trays for Stonework

BBA-approved stepped cavity tray system for multi cavity options in stone wall construction of 150mm coursing heights.

Everdry preformed cavity trays are a range of DPC products for installation at the abutment of a pitched roof with a cavity wall to prevent water penetration. All Everdry cavity tray components are designed to comply fully with the requirements set out in Building Regulations, British Standards and the NHBC.

Uses:

At the abutment of a pitched roof with a cavity wall

On external walls not exceeding 150mm thickness built from natural or reconstituted stone with regular course heights, including mortar of approx. 150mm

On roof pitches of 7.5 degrees and above

Clear cavity widths of between 50mm-125mm

Specification Details

Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Timloc Building Products is consulted before specifying.

Timloc Building Products
Timloc House, Ozone Park
Howden
East Riding of Yorkshire
DN14 7SD


Unleaded Everdry Stepped Cavity Trays for Stonework

Everdry 450mm Intermediate Stonework Cavity Tray
• Certifications: BBA
• Standards: ISO 14001, ISO 9001, NHBC
• Product ID Number: 7101-7102
• Features: 150mm high back upstand exceeds minimum requirements, Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf, Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required, Permanent stopend protects the perpendicular joint and cuts out water backtracking along the stonework, The system is available on request with pre-applied polystyrene strips
• Colour: Black
• Material: Polyethylene
• Length: 450 mm
• Uniclass: Pr_25_57_21 Damp-proof courses and cavity trays

Everdry 450mm Intermediate Stonework Cavity Tray
• Certifications: BBA
• Standards: ISO 14001, ISO 9001, NHBC
• Product ID Number: 7103-7104
• Features: 150mm high back upstand exceeds minimum requirements, Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf, Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required, Permanent stopend protects the perpendicular joint and cuts out water backtracking along the stonework, The system is available on request with pre-applied polystyrene strips
• Colour: Black
• Material: Polyethylene
• Length: 450 mm
• Uniclass: Pr_25_57_21 Damp-proof courses and cavity trays

Everdry 450mm Intermediate Stonework Cavity Tray
• Certifications: BBA
• Standards: ISO 14001, ISO 9001, NHBC
• Product ID Number: 7105-7106
• Features: 150mm high back upstand exceeds minimum requirements, Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf, Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required, Permanent stopend protects the perpendicular joint and cuts out water backtracking along the stonework, The system is available on request with pre-applied polystyrene strips
• Colour: Black
• Material: Polyethylene
• Length: 450 mm
• Uniclass: Pr_25_57_21 Damp-proof courses and cavity trays

Everdry 450mm Intermediate Stonework Cavity Tray
• Certifications: BBA
• Standards: ISO 14001, ISO 9001, NHBC
• Product ID Number: 7107-7110
• Features: 150mm high back upstand exceeds minimum requirements, Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf, Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required, Permanent stopend protects the perpendicular joint and cuts out water backtracking along the stonework, The system is available on request with pre-applied polystyrene strips
• Colour: Black
• Material: Polyethylene
• Length: 450 mm
• Uniclass: Pr_25_57_21 Damp-proof courses and cavity trays

Everdry 625mm Intermediate Stonework Cavity Tray
• Certifications: BBA
• Standards: ISO 14001, ISO 9001, NHBC
• Product ID Number: 7111-7120
• Features: 150mm high back upstand exceeds minimum requirements, Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf, Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required, Permanent stopend protects the perpendicular joint and cuts out water backtracking along the stonework, The system is available on request with pre-applied polystyrene strips
• Colour: Black
• Material: Polyethylene
• Length: 625 mm
• Uniclass: Pr_25_57_21 Damp-proof courses and cavity trays

Everdry 1250mm Intermediate Stonework Cavity Tray
• Certifications: BBA
• Standards: ISO 14001, ISO 9001, NHBC
• Product ID Number: 7121-7130
• Features: 150mm high back upstand exceeds minimum requirements, Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf, Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required, Permanent stopend protects the perpendicular joint and cuts out water backtracking along the stonework, The system is available on request with pre-applied polystyrene strips
• Colour: Black
• Material: Polyethylene
• Length: 1250 mm
• Uniclass: Pr_25_57_21 Damp-proof courses and cavity trays

Everdry 450mm Stop End Starter Stonework Cavity Tray Right & Left Handed
• Certifications: BBA
• Standards: ISO 14001, ISO 9001, NHBC
• Product ID Number: 7131
• Features: 150mm high back upstand exceeds minimum requirements, Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf, Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required, Permanent stopend protects the perpendicular joint and cuts out water backtracking along the stonework, The system is available on request with pre-applied polystyrene strips
• Colour: Black
• Material: Polyethylene
• Length: 450 mm

Everdry 450mm Stop End Starter Stonework Cavity Tray Right & Left Handed
• Certifications: BBA
• Standards: ISO 14001, ISO 9001, NHBC
• Product ID Number: 7132-7134
• Features: 150mm high back upstand exceeds minimum requirements, Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf, Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required, Permanent stopend protects the perpendicular joint and cuts out water backtracking along the stonework, The system is available on request with pre-applied polystyrene strips
• Colour: Black
• Material: Polyethylene
• Length: 450 mm

Everdry 450mm Stop End Starter Stonework Cavity Tray Right & Left Handed
• Certifications: BBA
• Standards: ISO 14001, ISO 9001, NHBC
• Product ID Number: 7135
• Features: 150mm high back upstand exceeds minimum requirements, Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf, Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required, Permanent stopend protects the perpendicular joint and cuts out water backtracking along the stonework, The system is available on request with pre-applied polystyrene strips
• Colour: Black
• Material: Polyethylene
• Length: 450 mm

Everdry 450mm Stop End Starter Stonework Cavity Tray Right & Left Handed
• Certifications: BBA
• Standards: ISO 14001, ISO 9001, NHBC
• Product ID Number: 7136-7139
• Features: 150mm high back upstand exceeds minimum requirements, Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf, Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required, Permanent stopend protects the perpendicular joint and cuts out water backtracking along the stonework, The system is available on request with pre-applied polystyrene strips
• Colour: Black
• Material: Polyethylene
• Length: 450 mm

Everdry 550mm Corner Starter Stonework Cavity Tray Right & Left Handed
• Certifications: BBA
• Standards: ISO 14001, ISO 9001, NHBC
• Product ID Number: 7141
• Features: 150mm high back upstand exceeds minimum requirements, Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf, Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required, Permanent stopend protects the perpendicular joint and cuts out water backtracking along the stonework, The system is available on request with pre-applied polystyrene strips
• Colour: Black
• Material: Polyethylene
• Length: 550 mm

Everdry 550mm Corner Starter Stonework Cavity Tray Right & Left Handed
• Certifications: BBA
• Standards: ISO 14001, ISO 9001, NHBC
• Product ID Number: 7142-7150
• Features: 150mm high back upstand exceeds minimum requirements, Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf, Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required, Permanent stopend protects the perpendicular joint and cuts out water backtracking along the stonework, The system is available on request with pre-applied polystyrene strips
• Colour: Black
• Material: Polyethylene
• Length: 550 mm

Everdry 450mm Ridge Stonework Cavity Tray
• Certifications: BBA
• Standards: ISO 14001, ISO 9001, NHBC
• Product ID Number: 7161
• Features: 150mm high back upstand exceeds minimum requirements, Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf, Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required, Permanent stopend protects the perpendicular joint and cuts out water backtracking along the stonework, The system is available on request with pre-applied polystyrene strips
• Colour: Black
• Material: Polyethylene
• Length: 450 mm

Everdry 450mm Ridge Stonework Cavity Tray
• Certifications: BBA
• Standards: ISO 14001, ISO 9001, NHBC
• Product ID Number: 7162-7165
• Features: 150mm high back upstand exceeds minimum requirements, Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf, Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required, Permanent stopend protects the perpendicular joint and cuts out water backtracking along the stonework, The system is available on request with pre-applied polystyrene strips
• Colour: Black
• Material: Polyethylene
• Length: 450 mm

Similar Cavity Trays Products
Unleaded Inter-loc Horizontal Cavity Trays
Timloc Building Products
Poly Strip Unleaded Everdry Stepped Cavity Trays for Brickwork
Timloc Building Products
Unleaded Everdry Stepped Cavity Trays for Blockwork
Timloc Building Products
Poly Strip Unleaded Everdry Stepped Cavity Trays for Blockwork
Timloc Building Products
Polystrip Unleaded System 2000 Horizontal Cavity Trays
Timloc Building Products
Polystrip Unleaded Horizontal Cavity Trays
Timloc Building Products
Unleaded System 2000 Horizontal Cavity Trays
Timloc Building Products
Poly Strip Unleaded Everdry Stepped Cavity Trays for Stonework
Timloc Building Products
Unleaded Everdry Stepped Cavity Trays for Brickwork
Timloc Building Products
Lintel Stopend - Purpose-made profile to protect modern steel lintels
Timloc Building Products
Unleaded Everdry Stepped Cavity Trays for Stonework
Timloc Building Products