Lifting station type ABS Sanisett
Sump for one or two pumps
The Sanisett 1 and 2 are sumps for one or two pumps, designed for above- or below-ground use. They provide effluent pumping from washing machines, sinks, dishwashers, showers, and bathtubs from buildings and areas below the sewer level in accordance with EN 12050-2.
Features
- The required pump must be ordered separately and fitted. The following pumps may be used with the Sanisett: Robusta 200 W/TS , Robusta 200C W/TS, Robusta 200 W/KS, Coronada 250 W/KS, IP 900 W/KS, IP 900 D/KS, Piranha 08 W/KS, Piranha 09 W/KS, MF 154W/KS -804D/KS
- Suitable for use as a floor drain. Alternatively a stainless steel insert is available as an accessory for fitting into the manhole cover to close and seal the run-off vent
- Includes plastic cover for protection of the floor grating during installation work
- Two inflow ports (DN 100/150) at 90º offset for DIN push-on connection. One DN 70 port for venting and use as a cable duct (supplied as standard with plug/cable inlet seal)
- Compact, robust polyethelyne collection tank
Main benefits
- Globular shape for extra strength, with PP-30GF manhole cover featuring floor run-off and optional odor lock with aeration and venting
- Sanisett 1 for one KS version pump (Coronada, IP, Piranha, MF) or pump with built-in level control (Robusta)
- Sanisett 2 for two non-KS pumps. Separate KS level control system, with support bracket for discharge line junction piece and KS float switches
- Easily transported and fitted with compact dimensions that allow passage through a standard door opening
- Kit available as an accessory for sealing top of tank to damp proof course
- Universally adjustable in height and can be swiveled: easy to align with floor levels and tiling patterns, irrespective of the inflow or direction of the discharge lines
Main applications
- Effluent pumping from washing machines, sinks, dishwashers, showers, and bathtubs
- Also suitable for the pumping of sewage containing fecal matter outside of areas covered by EN when installed using Piranha pump(s)
Specification Details
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Sulzer Wastewater UK is consulted before specifying.
Technical
|
||
| Features (?) | Globular shape for extra strength , Heads up to 20 m with Piranha 08/09 pumps , Maximum allowable temperature of medium 40 ºC , Plastic cover for protection of the floor grating during installation work supplied as standard , Sanisett 1 is designed for one KS version pump , Sanisett 2 is designed for two non-KS pumps and has a separate KS level control system , Suitable for use as a floor drain , Two inflow ports at 90º offset (DN 100/150) for DIN push-on connection , Universally adjustable in height and can be swivelled | |
| IP Rating (?) | IP 68 | |
| Motor Speed (?) | 2900 rpm | |
| Pump Type (?) | Light drainage pump type ABS Coronada 250 WKS , Light drainage pump type ABS IP , Light drainage pump type ABS Robusta 200 WTS , Light wastewater pump type ABS MF 154 W to 804 D , Submersible grinder pump type ABS Piranha 08/09 with heads up to 20 m | |
Materials & Finishes
|
||
| Casing Material (?) | Polyethylene | |
Size & Weight
|
||
| Cable Length (?) | 10000 mm | |
| Capacity (?) | 180 l | |
| Weight (?) | 14 kg | |
Commercial
|
||
| Typical Building Sector (?) | Commercial , Domestic | |
Similar Drainage Pumps Products
Contact
Contact
Contact