SW-DW Stove Pipe Starter Section (Long) ICID Plus
This component is used to connect from vitreous enamel or stainless steel single wall connecting flue pipe to ICID. The protruding liner should be pushed down inside the female socket of the connecting flue pipe and the joint sealed with fire cement or high temp sealant to provide a gas tight joint. When a single wall connecting flue pipe is used to connect to the starter section, the joint between these two component must be a minimum of 425mm below the ceiling.
Twist-lock bayonet jointing system.
Low external case temperature.
ICID corrosion tested with designation V2/V3.
Engineered design.
Fast inter fit with Eco ICID System Chimney.
Simple and fast to install.
Specification Details
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Schiedel Chimney Systems Ltd is consulted before specifying.
Size & Weight
|
||
| Internal Diameter (?) | 125 mm | |
| Weight (?) | 7.13 kg | |
Materials & Finishes
|
||
| Colour (?) | Black | |
Other
|
||
| Uniclass (?) | Pr_70_65_30 Flues and chimneys | |
Certifications & Ratings
|
||
| Certifications (?) | TUV | |
Commercial
|
||
| Product ID Number (?) | 125348 | |
Physical Properties
|
||
| Product Type (?) | Stove Pipe | |
Contact
Contact
Contact