ResoRubber Base - Soundproofing resilient layer
Resonate's ResoRubber Base are a range of thin and robust resilient layers, primarily used in under-screed applications to acoustically isolate the screed from the sub-floor and flanking walls.
Recycled, under-screed noise barrier
Available in 3, 5, 6, 8 and 10mm thickness' the soundproofing solution is manufactured from recycled rubber granules bonded with cold cure PUR.
Installation Options
ResoRubber Base is an under-screed solution, laid directly over the subfloor.
ResoRubber Edge is laid around the perimeter of each room and either 40mm flowing screed or 65mm sand cement screed laid on top.
ResoRubber Edge is designed to isolate the screed and prevent flanking transition around the floor perimeter, reducing the risk of Part E sound test failure. The rolls feature five perforated slits towards the top of the roll and 1 slit 50mm from the base of the roll.
Specification Details
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that RESONATE SYSTEMS LTD is consulted before specifying.
Size & Weight
|
||
| Area (?) | 20 m2 | |
| Average Weight (?) | 2.2 kg/m2 | |
| Length (?) | 20000 mm | |
| Thickness (?) | 3 mm | |
| Width (?) | 1000 mm | |
Commercial
|
||
| Quantity Per Pack (?) | 20 | |
Other
|
||
| Uniclass (?) | Pr_25_71 Rigid board , panel and sheet products | |
Technical
Similar Acoustic Insulation Boards Products
Contact
Contact
Contact