Marsh Hydroil Wash-down Separators
Pollution Prevention
Available in capacities from 2000-20,000 litres, the Marsh washdown oil separator range safely removes silt and debris from vehicle wash-down facilities.
These units are primarily used on car wash bays, pressure wash facilities or other cleaning facilities where the effluent must be discharged to the foul water drainage system.
It is a legal requirement to install a silt trap or wash-down separator on commercial sites, such as vehicle wash bays, where there is an environmental risk of contamination from dirt, brake dust, traffic film residue, cleaning agents, oil, etc. In all cases, you should contact your local building control or environmental agency for specific site requirements.
Easy access turrets for maintenance and servicing (Turret guards optional) are available. Variable invert depths and inlet/outlet configurations are also available to suit individual site conditions. Please contact Marsh Industries upon specification.
As with all Marsh products, the tank body is guaranteed for 25 years with a design life of 50 years, providing it is installed in accordance with the manufacturers installation instructions
Specification Details
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Marsh Industries is consulted before specifying.
Size & Weight
|
||
| Capacity (?) | 2800 l | |
| Height (?) | 1715 mm | |
| Inlet Invert (?) | 700 mm | |
| Length (?) | 3000 mm | |
| Outlet Invert (?) | 750 mm | |
| Pipe Diameter (?) | 110 mm | |
| Width (?) | 1200 mm | |
Certifications & Ratings
|
||
| CE Marking (?) | ||
| Certifications (?) | EN858 | |
Commercial
|
||
| Application (?) | car wash , lorry wash | |
| Guarantee (?) | 25 Years | |
Similar Oil Separators Products
Contact
Contact
Contact