Planitop 100 - Light grey, rapid setting, fine mortar for repairing and smoothing concrete and renders

Planitop 100 is a one-component mortar based on special cement binders, selected fine grain aggregates, additives and polymers manufactured according to a formula developed in the MAPEI research laboratories. 

When mixed with water, Planitop 100 produces a runny mortar that is easily applied even vertically up to 3 mm thick per coat. 

Because of its high synthetic resin content, Planitop 100 has excellent adhesion to all cementbased surfaces and forms a compact and mechanically strong layer after hardening (1 to 1.5 hours at +20°C). 

For thicknesses greater than 3 mm, adding 30% aggregates with a maximum diameter of 2 mm is recommended. 

Planitop 100 meets the requirements defined by EN 1504-9 (“Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - General principles for the use of products and systems”) and the minimum requirements claimed by EN 1504-2 coating (C) (“Surface protection systems for concrete”) according to MC and IR principles. 

N.B. Planitop 100 has a shelf life of 12 months when stored in a dry place. With time, however, setting may be slower, but Planitop 100’s final mechanical characteristics will remain unchanged.