Mapelastic Guard - Two-component, flexible cementitious mortar for protecting large concrete structures subjected to high stress
Two-component, elastic cementitious mortar for protecting large concrete structures subjected to high stress.
TECHNICAL DATA:
Mixing ratio: 3 parts of MAPELASTIC GUARD comp. A with 1 part of MAPELASTIC GUARD comp. B.
Pot life of mix: approximately 1 h (at +20°C).
Minimum applicable thickness: 2 mm per layer.
Classification: EN 1504-2 - coating (C) principles PI, MC and IR.
Storage: 12 months (comp. A); 24 months (comp. B).
Application: trowel or by spray with a rendering machine.
Consumption:
– approximately 1.7 kg/m² per mm of thickness (by trowel).
– approximately 2.2 kg/m² per mm of thickness (by spray).
Packaging:
32 kg kits:
– 24 kg bags (comp. A);
– 8 kg tanks (comp. B).
Specification Details
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Mapei is consulted before specifying.
Technical
|
||
| Adhesion to concrete (?) | 1 N/mm2 | |
| Application Temperature (?) | 8 - 35 °C | |
| Elongation (?) | 30 % | |
| Exposure Category (?) | Building Materials & Hardware | |
Physical Properties
|
||
| Shelf Life (?) | 12 Months | |
Other
|
||
| Uniclass (?) | Pr_20_31_53 Mortars and grouts | |
Certifications & Ratings
|
||
| CE Marking (?) | ||
| Standards (?) | EN 1504-9 | |
Commercial
|
||
| Application (?) | Flexible skimming layers on concrete structures with thin sections , Protecting concrete piles , Protecting concrete surfaces that come into contact with seawater , Protecting concrete with cracks caused by shrinkage to block the penetration of water and aggressive agents present in the atmosphere , Protecting structures with insufficient concrete cover around reinforcing steel | |
Materials & Finishes
|
||
| Colour (?) | Grey | |
Size & Weight
|
||
| Density (?) | 1700 Kg/m3 | |
Contact
Contact
Contact