In-line Slate Vent Large Format (GILSV30-25)
The in-line slate ventilator is a low profile, unobtrusive solution to ventilation requirements through a slate roof. The integral pipe outlet is perfect for extraction and requires no additional adaptor. The vents flush profile with its lightly textured finish helps to maintain an unbroken appearance to the roofline whether used at high or low level. The tortured path through the 4mm louvred grill and internal geometry is designed to maintain airflow whilst channelling any water ingress out of the vent and on to the roof covering. A protective skirt around the vent also helps to weatherproof the laps with the surrounding slates.
Specification Details
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Manthorpe Building Products Ltd is consulted before specifying.
Commercial
|
||
| Location of Manufacturer (?) | Ripley in Derbyshire | |
| Product ID Number (?) | GILSV30-25 | |
| Quantity Per Pack (?) | 10 | |
| Typical Use (?) | For air exit above roof. | |
Certifications & Ratings
|
||
| Certifications (?) | BRE | |
| Standards (?) | ISO 14001 , ISO 45001 , ISO 9001 | |
Physical Properties
|
||
| Roof Pitch (?) | 22.5 Degrees | |
Materials & Finishes
|
||
| Colour (?) | Black , Grey | |
| Manufacturing Method (?) | Injection Moulding | |
| Material (?) | Polypropylene | |
| No. of Colours Available (?) | 2 | |
Other
|
||
| Additional Notes (?) | Vent can be used with 500 x 250mm slates but it requires trimming of the adjacent slates | |
| Uniclass (?) | Ss_30_30_73 Roof ventilator systems | |
Technical
|
||
| Features (?) | 8800mm²/m of free vent area per unit , Built in spigot , Discreet , For use with 600 x 300mm format slates , Improves weatherproofing , In-line design , Independently wind tunnel tested at the BRE , No need for an adaptor , Suitable down to 22.5° roof pitch | |
Similar Roof Ventilation Products
Contact
Contact
Contact