Infresco P 6kW – Passive infrared (PIR) Controller for Quartz Infrared Halogen Lamps (turns on when people are present) Temperature Sensor + Soft-Start

Intelligent Control | Energy Saving
Extends lamp Life | Soft-Start/Zero-Voltage Switch-Off
Controls Up to 4 x 1.5kW Lamps
Temperature Sensor Turns Lamps Off at Set Ambient Temperature

The Infresco-P 6kW is part of a family of controllers designed to provide energy saving when used with quartz infrared halogen lamps or other heating and lighting products. The ‘P’ model has a built in PIR sensor allowing the lamps to automatically switch on only when people are present. In addition to the PIR, a temperature sensor monitors the outside temperature and inhibits the lamps when the temperature exceeds a pre-determined set point of between 5°C and 25°C.

The microcontroller-based unit incorporates zero-voltage switching and a soft-start function to eliminate the lamps’ initial high inrush current – potentially increasing lamp life by as much as 30%. The lamps are switched on for a user- settable time period of between 1 and 60 minutes. This period is reset each time the PIR detects any further movement. Installation of the unit is simple and once installed is relatively maintenance-free.

Technical data:
Supply Voltage: 230VAC +/- 10% 50/60 Hz
Switching Capacity: 6kW Max
Detection Range: 5 metres
Detection Angle: 100°
Temperature Set Point: 5°C to 25°C
Lamp On-Time: 1 to 60 Minutes
Current Consumption (control circuit): 20mA
Terminals: 6.0mm2 Rising Clamp
Operating Temperature: -20°C to 40°C
Protection Rating: IP65
Gland Diameter: Max Cable Entry 2.5mm2
Enclosure Dimensions: 130x130x75