FOAMGLAS PERINSUL HL (High Load) - Thermal Bridging
FOAMGLAS PERINSUL HL is a very high density speciality product used to eliminate structural thermal bridging. The upper and the lower surface of the insulation are bitumen coated and laminated with a PE/Glass Fleece Composite, compatible with mortar. The upper side is green.
FOAMGLAS Insulation is manufactured from specially graded recycled glass ( 60%) and natural raw materials which are available in abundant supply (sand, dolomite, lime ). The insulation is totally inorganic, contains no ozone depleting propellants, flame resistant additives or binders. Without VOC or other volatile substances.
Specification Details
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that FOAMGLAS® insulation is consulted before specifying.
Technical
|
||
| Compressive Strength at 10% Compression (?) | 275 kPa | |
| Features (?) | Acid Resistant , Chemical Resistant , Dimensionally stable , Ecological , High compressive strength , Impervious to water vapour , Non-combustible , Radon protection , Resistant to attack , Time-tested thermal performance , Waterproof | |
| Modulus of Elasticity (?) | 1500 N/mm2 | |
| Specific Heat (?) | 1000 KJ/KgK | |
| Thermal Conductivity (?) | 0.058 W/mK | |
| Working Temperature (?) | -265 - 430 °C | |
Commercial
|
||
| Application (?) | Floor-wall base element to eliminate structural thermal bridging and rising damp , Parapet walls | |
| Range Name (?) | Perinsul | |
Size & Weight
|
||
| Density (?) | 200 Kg/m3 | |
| Length (?) | 450 mm | |
| Thickness (?) | 65 mm | |
| Width (?) | 90 - 365 mm | |
Certifications & Ratings
|
||
| Reaction to Fire (?) | A1 | |
| Standards (?) | cf DIN 4102-17 , EN 13471 , EN 13501-1 , EN ISO 10456 , ISO 14025 , ISO 15804 | |
Physical Properties
|
||
| Application Method / Fixing Method (?) | Compatible with mortar | |
Contact
Contact
Contact