CXP - Dirt Separator
Dutypoint CXP Dirt Separators are designed to remove impurities and particles. These units should always be installed in systems before equipment that requires protection from dirt and sludge, such as boilers, chillers, control valves and pumps. In heating systems this should be in the return loop close to the boiler. In a chilled water system the unit should be located in the return loop close to the chiller. Periodic draining of the CXP will keep the system free of impurities, prolonging the life of other installed equipment.
Specification Details
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that Dutypoint Systems is consulted before specifying.
Size & Weight
|
||
| Diameter (?) | 50 - 300 mm | |
| Volume (Litres) (?) | 5 - 363 l | |
| Weight (?) | 15 - 400 kg | |
Commercial
|
||
| Typical Use (?) | Boilers , Chillers , Control valves , Pumps | |
Other
|
||
| Uniclass (?) | Pr_70_60_37 Heat pumps | |
Technical
|
||
| Flow Rate (?) | 130 - 4580 l/min | |
| Operating Pressure (?) | 10 bar | |
| Temperature (?) | 110 °C | |
Materials & Finishes
|
||
| Material (?) | Carbon Steel , Stainless steel | |
Similar Circulators / In-line Pumps Products
Contact
Contact
Contact