Strongcoat SL - Self-levelling epoxy topping for floor surfaces

Strongcoat SL is a three-pack solvent free, epoxy-based selflevelling topping that provides floor surfaces with a seamless, hygienic and cosmetically attractive finish.

USAGE
Strongcoat SL is applied by trowel to horizontal surfaces and has very good durability towards pedestrian and vehicular traffic. It also has very good resistance to many of the chemicals commonly found in an industrial environment (consult our Technical Department for further details). It can be supplied in a variety of colours (consult our Sales Department for details). Slip resistant finishes can be produced for very demanding situations.

KIT FORM
18kg

THICKNESS RANGE
3-6mm

COVERAGE
Approximately 3.5m² per kit at 3mm thick.

STORAGE
Store at temperatures between 5°C and 30°C.

SHELF LIFE
Approximately 24 months if stored in unopened containers and under good conditions.

SURFACE PREPARATION
The surface must be clean, dry (less than 75% RH measured by hygrometer) and free from dust, laitance, oils, paints or other forms of contamination. Grit blasting can be used to remove laitance and surface contamination (see the Guide to Surface Preparation for further details). For treatment of surfaces containing expansion joints consult our Technical Department.