Flameshield Fire Curtain Standard Control Panel

The P250 generally operates via a wall mounted 3 position key switch. Under normal operation the curtain is opened and closed via this key switch.

Fire Conditions – The panel continuously monitors the normally closed alarm input terminals, if the terminals go open i.e alarm triggered, the shutter will close under power or via gravity to the fully closed position. Providing the alarm signal is cleared you can re-open the shutter accordingly.

Facility to link audio or visual warning devices, a siren or flashing light can be added, during the time the alarm input is open the 24Volt DC alarm is activated to allow these units to be added.

The P250 generally operates via a wall mounted 3 position key switch. Under normal operation the curtain is opened and closed via this key switch.

Fire Conditions – The panel continuously monitors the normally closed alarm input terminals, if the terminals go open i.e alarm triggered, the shutter will close under power or via gravity to the fully closed position. Providing the alarm signal is cleared you can re-open the shutter accordingly.

Facility to link audio or visual warning devices, a siren or flashing light can be added, during the time the alarm input is open the 24Volt DC alarm is activated to allow these units to be added.

An emergency override alarm button can be used, this will allow you to open the shutter even if the alarm signal is still present, effectively if the alarm signal is still active, once you remove the signal i.e. the override button is released the shutter will re-commence its close cycle.

The P250 unit has a test function input that allows regular testing of the control / curtain.