Reflectatherm® Plus - Condensation Control - Reflective vapour control layer
by A Proctor Group
Reflectatherm Plus is a reflective, high resistance air and vapour control layer for internal walls, ceilings and floors, specifically designed to enhance the thermal performance when placed on the warm side of the insulation.
The membrane should be installed with the foil side facing the cavity. In ceilings the product is placed between the underside of the rafters and the ceiling lining. Adjacent sheets should be lapped by at least 150mm and sealed with a suitable tape. Minimise penetrations caused by services and seal all
joints.
- High vapour resistance
- Improved airtightness
- Creates service void
- Help meets the requirements of the Part L in England and Wales, Section 6 in Scotland, and Technical Guidance Document L in Ireland
- R value of 0.665 m2 K/W when used with a minimum 19mm service cavity
- Creates an unbroken vapour control layer
- Sd Value of >150m
Specification Details for Reflectatherm® Plus - Condensation Control - Reflective vapour control layer (Structural Insulated Panels (SIPs))
Please note that these product properties are not a replacement for the manufacturer's literature and it is always recommended that A Proctor Group is consulted before specifying.
Certifications & Ratings
Commercial
|
||
| Typical Building Sector (?) | Commercial , Domestic , Government | |
Technical
|
||
| R-value (?) | 0.78 m2K/W | 100.00% |
| Water Vapour Resistance (?) | 750 MNs/g | |
| Water Vapour Resistance SD (?) | 150 m | |
Other
|
||
| Uniclass (?) | Pr_20_93_85 Structural units | |
Looking for specific information on the sustainability credentials of this product?
File Downloads for Reflectatherm® Plus - Condensation Control - Reflective vapour control layer
Similar Structural Insulated Panels (SIPs) Products
Contact
Contact
Contact
